Chapter

2011年4月20日 — You can use a fully specified static route when the output interface is a multi-access interface and you need to identify the next-hop address.

This document describes static routes and uses a problem scenario to demonstrate when it is desirable to specify how to reach the next hop IP address.

The next-hop address must be directly attached to the specified output interface. Floating Static Routes. A floating static route is a static route that the ...

2023年9月11日 — You can use a fully specified static route when the output interface is a multi-access interface and you need to identify the next-hop address.

Setting static routing on Cisco Layer 3 device is the fastest way to achieve communication in routed IP networks. How to configure static routing to particular ...

... route o - ODR, P - periodic downloaded static route Gateway of last resort is not set. Ad. 然後我們在Interface 設定IP Address 並把Interface 啟動(假設這個 ...

In order to configure static routing in Cisco IOS routers, this is the command to use. ... The IP route command includes the destination network followed by a ...

The routing tables shows only the two directly connected networks and the two static routes which are using interface fa0/1 as target. No entries of dynamic ...

2023年7月10日 — This is the floating static route to the LAN. 以下是R2 上的組態： hostname R2 ! interface Serial1/0 ip address 10.10.10.2 255.255.255.252